{"id":53300,"date":"2017-04-12T11:17:37","date_gmt":"2017-04-12T10:17:37","guid":{"rendered":"https:\/\/www.microplanet.ma\/?post_type=product&#038;p=53300"},"modified":"2026-10-19T18:26:30","modified_gmt":"2026-10-19T18:26:30","slug":"ttp226-8-key-capacitive-touch-sensor-module","status":"publish","type":"product","link":"https:\/\/www.microplanet.ma\/en\/produit\/ttp226-8-key-capacitive-touch-sensor-module\/","title":{"rendered":"TTP226 8-Key Capacitive Touch Sensor Module"},"content":{"rendered":"<h3>TTP226 8-Key Capacitive Touch Sensor Module<\/h3>\n<p>This module uses a TTP226 capacitive touch controller to detect touch at eight sensing pads. It can replace mechanical keys in user interfaces and interactive electronics projects.<\/p>\n<h4>\ud83d\udd27 Listed specifications<\/h4>\n<ul>\n<li>Supply voltage: 2.0\u20135.5 V DC<\/li>\n<li>Outputs: OUT1\u2013OUT8, one digital output for each touch key in direct-output mode<\/li>\n<li>Board dimensions: 47.4 \u00d7 46 mm<\/li>\n<li>The listing also gives 60 ms fast-mode and approximately 220 ms low-power response times and describes current as a few \u03bcA; confirm these figures for the exact board and IC version before relying on them.<\/li>\n<\/ul>\n<p><strong>Specification note:<\/strong> The TTP226 manufacturer\u2019s information for the IC lists about 100 \u03bcA at 3 V and a power-on\/recalibration time below 1 second. This differs from some timing and current figures in the product listing. The module\u2019s exact IC and settings are not identified, so verify its datasheet and board revision.<\/p>\n<h4>\u2699\ufe0f How it works<\/h4>\n<p>Touching one of the eight pads changes the capacitance at that electrode. The controller detects the change and provides a corresponding output. Depending on the chip and board options, outputs may use direct, matrix, or serial mode and may be active-high or active-low.<\/p>\n<h4>\ud83d\udca1 Applications<\/h4>\n<ul>\n<li>Touch switches and control panels<\/li>\n<li>Lighting controls<\/li>\n<li>User interfaces<\/li>\n<li>Interactive electronics projects<\/li>\n<li>Controls without mechanical buttons<\/li>\n<\/ul>\n<h4>\ud83d\udccc Pinout<\/h4>\n<ul>\n<li><strong>DV<\/strong>: Data Valid (as labelled on the module)<\/li>\n<li><strong>GND<\/strong>: ground<\/li>\n<li><strong>VCC<\/strong>: supply, 2.0\u20135.5 V as listed<\/li>\n<li><strong>OUT1\u2013OUT8<\/strong>: digital outputs for the eight keys, when the board is configured for direct output<\/li>\n<\/ul>\n<h4>\u2699\ufe0f Configuration pads<\/h4>\n<p>The listing describes the following solder-pad options. Their exact behavior and defaults depend on the module revision. Check the board markings and documentation before altering solder bridges.<\/p>\n<ul>\n<li><strong>SE1\u2013SE4<\/strong>: touch sensitivity selection<\/li>\n<li><strong>AHL<\/strong>: selects active-high or active-low output level<\/li>\n<li><strong>OP0 and OP1<\/strong>: output-mode selection; the listing mentions direct and serial modes<\/li>\n<li><strong>OSC1 and OSC2<\/strong>: external oscillator configuration, if required by that board<\/li>\n<\/ul>\n<h4>\ud83d\udd0c Using it with an Arduino Uno<\/h4>\n<p>Connect VCC and GND to a supply within the verified rating for your module. In direct-output mode, connect OUT1\u2013OUT8 to digital inputs. Confirm the selected output mode, logic polarity, voltage compatibility, and pin labels before wiring.<\/p>\n<h4>Basic Arduino example<\/h4>\n<pre class=\"prism undefined-numbers lang-cpp\" data-lang=\"C++\"><code>#define PAD1 2\r\n#define PAD2 3\r\n#define PAD3 4\r\n#define PAD4 5\r\n#define PAD5 6\r\n#define PAD6 7\r\n#define PAD7 8\r\n#define PAD8 9\r\n\r\n\r\nvoid setup() {\r\n\u00a0 Serial.begin(9600);\r\n\u00a0 pinMode(PAD1, INPUT);\r\n\u00a0 pinMode(PAD2, INPUT);\r\n\u00a0 pinMode(PAD3, INPUT);\r\n\u00a0 pinMode(PAD4, INPUT);\r\n\u00a0 pinMode(PAD5, INPUT);\r\n\u00a0 pinMode(PAD6, INPUT);\r\n\u00a0 pinMode(PAD7, INPUT);\r\n\u00a0 pinMode(PAD8, INPUT);\r\n}\r\n\r\n\r\nvoid loop() {\r\n\u00a0 if (digitalRead(PAD1) == HIGH) {\r\n\u00a0 \u00a0 Serial.println(\"PAD1 touch detected\");\r\n\u00a0 }\r\n\u00a0 if (digitalRead(PAD2) == HIGH) {\r\n\u00a0 \u00a0 Serial.println(\"PAD2 touch detected\");\r\n\u00a0 }\r\n\u00a0 if (digitalRead(PAD3) == HIGH) {\r\n\u00a0 \u00a0 Serial.println(\"PAD3 touch detected\");\r\n\u00a0 }\r\n\u00a0 if (digitalRead(PAD4) == HIGH) {\r\n\u00a0 \u00a0 Serial.println(\"PAD4 touch detected\");\r\n\u00a0 }\r\n\u00a0 if (digitalRead(PAD5) == HIGH) {\r\n\u00a0 \u00a0 Serial.println(\"PAD5 touch detected\");\r\n\u00a0 }\r\n\u00a0 if (digitalRead(PAD6) == HIGH) {\r\n\u00a0 \u00a0 Serial.println(\"PAD6 touch detected\");\r\n\u00a0 }\r\n\u00a0 if (digitalRead(PAD7) == HIGH) {\r\n\u00a0 \u00a0 Serial.println(\"PAD7 touch detected\");\r\n\u00a0 }\r\n\u00a0 if (digitalRead(PAD8) == HIGH) {\r\n\u00a0 \u00a0 Serial.println(\"PAD8 touch detected\");\r\n\u00a0 }\r\n\u00a0 delay(100);\r\n}<\/code><\/pre>\n<p>This example reads the eight digital outputs and reports active touch pads in the Serial Monitor.<\/p>\n<h4>Basic wiring<\/h4>\n<ul>\n<li><strong>VCC<\/strong>: 5V (Arduino), only if supported by the exact board<\/li>\n<li><strong>GND<\/strong>: GND (Arduino)<\/li>\n<li><strong>OUT1\u2013OUT8<\/strong>: D2\u2013D9 (Arduino), in direct-output mode<\/li>\n<\/ul>\n<h4>Advanced example with an I2C LCD<\/h4>\n<pre class=\"prism undefined-numbers lang-cpp\" data-lang=\"C++\"><code>#include &lt;Wire.h&gt;\r\n#include &lt;LiquidCrystal_I2C.h&gt;\r\n\r\n\r\nLiquidCrystal_I2C lcd(0x27, 16, 2);\r\n#define PAD1 2\r\n#define PAD2 3\r\n#define PAD3 4\r\n#define PAD4 5\r\n#define PAD5 6\r\n#define PAD6 7\r\n#define PAD7 8\r\n#define PAD8 9\r\n\r\n\r\nvoid setup() {\r\n\u00a0 lcd.begin();\r\n\u00a0 lcd.backlight();\r\n\u00a0 Serial.begin(9600);\r\n\u00a0 pinMode(PAD1, INPUT);\r\n\u00a0 pinMode(PAD2, INPUT);\r\n\u00a0 pinMode(PAD3, INPUT);\r\n\u00a0 pinMode(PAD4, INPUT);\r\n\u00a0 pinMode(PAD5, INPUT);\r\n\u00a0 pinMode(PAD6, INPUT);\r\n\u00a0 pinMode(PAD7, INPUT);\r\n\u00a0 pinMode(PAD8, INPUT);\r\n}\r\n\r\n\r\nvoid loop() {\r\n\u00a0 lcd.clear();\r\n\u00a0 if (digitalRead(PAD1) == HIGH) {\r\n\u00a0 \u00a0 lcd.print(\"PAD1 touch detected\");\r\n\u00a0 }\r\n\u00a0 if (digitalRead(PAD2) == HIGH) {\r\n\u00a0 \u00a0 lcd.print(\"PAD2 touch detected\");\r\n\u00a0 }\r\n\u00a0 if (digitalRead(PAD3) == HIGH) {\r\n\u00a0 \u00a0 lcd.print(\"PAD3 touch detected\");\r\n\u00a0 }\r\n\u00a0 if (digitalRead(PAD4) == HIGH) {\r\n\u00a0 \u00a0 lcd.print(\"PAD4 touch detected\");\r\n\u00a0 }\r\n\u00a0 if (digitalRead(PAD5) == HIGH) {\r\n\u00a0 \u00a0 lcd.print(\"PAD5 touch detected\");\r\n\u00a0 }\r\n\u00a0 if (digitalRead(PAD6) == HIGH) {\r\n\u00a0 \u00a0 lcd.print(\"PAD6 touch detected\");\r\n\u00a0 }\r\n\u00a0 if (digitalRead(PAD7) == HIGH) {\r\n\u00a0 \u00a0 lcd.print(\"PAD7 touch detected\");\r\n\u00a0 }\r\n\u00a0 if (digitalRead(PAD8) == HIGH) {\r\n\u00a0 \u00a0 lcd.print(\"PAD8 touch detected\");\r\n\u00a0 }\r\n\u00a0 delay(1000);\r\n}<\/code><\/pre>\n<p>This example reads the eight touch outputs and displays detected pads on an I2C LCD.<\/p>\n<h4>Components for the advanced example<\/h4>\n<ul>\n<li>Arduino Uno<\/li>\n<li>TTP226 capacitive touch module<\/li>\n<li>I2C 1602 LCD<\/li>\n<li>Connecting wires<\/li>\n<\/ul>\n<h4>Code overview<\/h4>\n<ol>\n<li><strong>Include libraries:<\/strong> <code>#include &lt;Wire.h&gt;<\/code> and <code>#include &lt;LiquidCrystal_I2C.h&gt;<\/code> for the LCD.<\/li>\n<li><strong>Initialization:<\/strong> Initializes the LCD and configures the touch-output pins.<\/li>\n<li><strong>Read and display:<\/strong> Reads the key outputs and displays the detected state on the LCD.<\/li>\n<\/ol>\n<h4>LCD example wiring<\/h4>\n<ul>\n<li><strong>VCC<\/strong>: 5V (Arduino), only if supported by the exact board<\/li>\n<li><strong>GND<\/strong>: GND (Arduino)<\/li>\n<li><strong>OUT1\u2013OUT8<\/strong>: D2\u2013D9 (Arduino), in direct-output mode<\/li>\n<li><strong>LCD VCC<\/strong>: 5V (Arduino)<\/li>\n<li><strong>LCD GND<\/strong>: GND (Arduino)<\/li>\n<li><strong>LCD SCL<\/strong>: A5 (Arduino Uno)<\/li>\n<li><strong>LCD SDA<\/strong>: A4 (Arduino Uno)<\/li>\n<\/ul>\n<h4>Library installation<\/h4>\n<p>To use the I2C LCD with Arduino, install the LiquidCrystal I2C library in Arduino IDE:<\/p>\n<ol>\n<li>Open Arduino IDE and ensure it is up to date.<\/li>\n<li>Open Library Manager from Sketch \u2192 Include Library \u2192 Manage Libraries.<\/li>\n<li>Search for \u201cLiquidCrystal I2C\u201d.<\/li>\n<li>Select and install the library.<\/li>\n<\/ol>\n<p>Disconnect power before changing solder pads or wiring. A matrix or serial configuration will not use the outputs as shown in the direct-mode examples; follow the exact module documentation.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Eight-key TTP226 capacitive touch module with individual digital outputs, 2.0\u20135.5 V DC listed supply, and a 47.4 \u00d7 46 mm board. Output modes and timing depend on the chip and board configuration; verify the exact revision.<\/p>\n","protected":false},"featured_media":53301,"template":"","meta":[],"product_brand":[],"product_cat":[314,316],"product_tag":[],"class_list":["post-53300","product","type-product","status-publish","has-post-thumbnail","product_cat-developpement-en","product_cat-modules-capteurs-en","first","instock","taxable","shipping-taxable","purchasable","product-type-simple"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.7 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>TTP226 8-Key Capacitive Touch Sensor Module | MicroPlanet<\/title>\n<meta name=\"description\" content=\"Eight-key TTP226 capacitive touch module with OUT1\u2013OUT8, configurable output modes, 2.0\u20135.5 V listed supply, and 47.4 \u00d7 46 mm board. Check chip datasheet and jumper settings.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.microplanet.ma\/produit\/module-tactile-capacitif-8-boutton-ttp226\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"TTP226 8-Key Capacitive Touch Sensor Module | MicroPlanet\" \/>\n<meta property=\"og:description\" content=\"Eight-key TTP226 capacitive touch module with OUT1\u2013OUT8, configurable output modes, 2.0\u20135.5 V listed supply, and 47.4 \u00d7 46 mm board. Check chip datasheet and jumper settings.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.microplanet.ma\/produit\/module-tactile-capacitif-8-boutton-ttp226\/\" \/>\n<meta property=\"og:site_name\" content=\"MicroPlanet Maroc\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/ArduinoPlanet\/\" \/>\n<meta property=\"article:modified_time\" content=\"2026-10-19T18:26:30+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.microplanet.ma\/wp-content\/uploads\/2017\/04\/156-1.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1000\" \/>\n\t<meta property=\"og:image:height\" content=\"1000\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"4 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.microplanet.ma\\\/produit\\\/module-tactile-capacitif-8-boutton-ttp226\\\/\",\"url\":\"https:\\\/\\\/www.microplanet.ma\\\/produit\\\/module-tactile-capacitif-8-boutton-ttp226\\\/\",\"name\":\"TTP226 8-Key Capacitive Touch Sensor Module | MicroPlanet\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.microplanet.ma\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.microplanet.ma\\\/produit\\\/module-tactile-capacitif-8-boutton-ttp226\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.microplanet.ma\\\/produit\\\/module-tactile-capacitif-8-boutton-ttp226\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.microplanet.ma\\\/wp-content\\\/uploads\\\/2017\\\/04\\\/156-1.png\",\"datePublished\":\"2017-04-12T10:17:37+00:00\",\"dateModified\":\"2026-10-19T18:26:30+00:00\",\"description\":\"Eight-key TTP226 capacitive touch module with OUT1\u2013OUT8, configurable output modes, 2.0\u20135.5 V listed supply, and 47.4 \u00d7 46 mm board. Check chip datasheet and jumper settings.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.microplanet.ma\\\/produit\\\/module-tactile-capacitif-8-boutton-ttp226\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.microplanet.ma\\\/produit\\\/module-tactile-capacitif-8-boutton-ttp226\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.microplanet.ma\\\/produit\\\/module-tactile-capacitif-8-boutton-ttp226\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.microplanet.ma\\\/wp-content\\\/uploads\\\/2017\\\/04\\\/156-1.png\",\"contentUrl\":\"https:\\\/\\\/www.microplanet.ma\\\/wp-content\\\/uploads\\\/2017\\\/04\\\/156-1.png\",\"width\":1000,\"height\":1000},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.microplanet.ma\\\/produit\\\/module-tactile-capacitif-8-boutton-ttp226\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Accueil\",\"item\":\"https:\\\/\\\/www.microplanet.ma\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Shop\",\"item\":\"https:\\\/\\\/www.microplanet.ma\\\/shop\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"TTP226 8-Key Capacitive Touch Sensor Module\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.microplanet.ma\\\/#website\",\"url\":\"https:\\\/\\\/www.microplanet.ma\\\/\",\"name\":\"MicroPlanet Maroc\",\"description\":\"Arduino, Electronique DIY, Modules, Composants, Raspberry PI\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.microplanet.ma\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.microplanet.ma\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.microplanet.ma\\\/#organization\",\"name\":\"MicroPlanet\",\"url\":\"https:\\\/\\\/www.microplanet.ma\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.microplanet.ma\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.microplanet.ma\\\/wp-content\\\/uploads\\\/2023\\\/05\\\/logo5.png\",\"contentUrl\":\"https:\\\/\\\/www.microplanet.ma\\\/wp-content\\\/uploads\\\/2023\\\/05\\\/logo5.png\",\"width\":400,\"height\":133,\"caption\":\"MicroPlanet\"},\"image\":{\"@id\":\"https:\\\/\\\/www.microplanet.ma\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/ArduinoPlanet\\\/\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"TTP226 8-Key Capacitive Touch Sensor Module | MicroPlanet","description":"Eight-key TTP226 capacitive touch module with OUT1\u2013OUT8, configurable output modes, 2.0\u20135.5 V listed supply, and 47.4 \u00d7 46 mm board. Check chip datasheet and jumper settings.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.microplanet.ma\/produit\/module-tactile-capacitif-8-boutton-ttp226\/","og_locale":"en_US","og_type":"article","og_title":"TTP226 8-Key Capacitive Touch Sensor Module | MicroPlanet","og_description":"Eight-key TTP226 capacitive touch module with OUT1\u2013OUT8, configurable output modes, 2.0\u20135.5 V listed supply, and 47.4 \u00d7 46 mm board. Check chip datasheet and jumper settings.","og_url":"https:\/\/www.microplanet.ma\/produit\/module-tactile-capacitif-8-boutton-ttp226\/","og_site_name":"MicroPlanet Maroc","article_publisher":"https:\/\/www.facebook.com\/ArduinoPlanet\/","article_modified_time":"2026-10-19T18:26:30+00:00","og_image":[{"width":1000,"height":1000,"url":"https:\/\/www.microplanet.ma\/wp-content\/uploads\/2017\/04\/156-1.png","type":"image\/png"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"4 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.microplanet.ma\/produit\/module-tactile-capacitif-8-boutton-ttp226\/","url":"https:\/\/www.microplanet.ma\/produit\/module-tactile-capacitif-8-boutton-ttp226\/","name":"TTP226 8-Key Capacitive Touch Sensor Module | MicroPlanet","isPartOf":{"@id":"https:\/\/www.microplanet.ma\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.microplanet.ma\/produit\/module-tactile-capacitif-8-boutton-ttp226\/#primaryimage"},"image":{"@id":"https:\/\/www.microplanet.ma\/produit\/module-tactile-capacitif-8-boutton-ttp226\/#primaryimage"},"thumbnailUrl":"https:\/\/www.microplanet.ma\/wp-content\/uploads\/2017\/04\/156-1.png","datePublished":"2017-04-12T10:17:37+00:00","dateModified":"2026-10-19T18:26:30+00:00","description":"Eight-key TTP226 capacitive touch module with OUT1\u2013OUT8, configurable output modes, 2.0\u20135.5 V listed supply, and 47.4 \u00d7 46 mm board. Check chip datasheet and jumper settings.","breadcrumb":{"@id":"https:\/\/www.microplanet.ma\/produit\/module-tactile-capacitif-8-boutton-ttp226\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.microplanet.ma\/produit\/module-tactile-capacitif-8-boutton-ttp226\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.microplanet.ma\/produit\/module-tactile-capacitif-8-boutton-ttp226\/#primaryimage","url":"https:\/\/www.microplanet.ma\/wp-content\/uploads\/2017\/04\/156-1.png","contentUrl":"https:\/\/www.microplanet.ma\/wp-content\/uploads\/2017\/04\/156-1.png","width":1000,"height":1000},{"@type":"BreadcrumbList","@id":"https:\/\/www.microplanet.ma\/produit\/module-tactile-capacitif-8-boutton-ttp226\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Accueil","item":"https:\/\/www.microplanet.ma\/"},{"@type":"ListItem","position":2,"name":"Shop","item":"https:\/\/www.microplanet.ma\/shop\/"},{"@type":"ListItem","position":3,"name":"TTP226 8-Key Capacitive Touch Sensor Module"}]},{"@type":"WebSite","@id":"https:\/\/www.microplanet.ma\/#website","url":"https:\/\/www.microplanet.ma\/","name":"MicroPlanet Maroc","description":"Arduino, Electronique DIY, Modules, Composants, Raspberry PI","publisher":{"@id":"https:\/\/www.microplanet.ma\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.microplanet.ma\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.microplanet.ma\/#organization","name":"MicroPlanet","url":"https:\/\/www.microplanet.ma\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.microplanet.ma\/#\/schema\/logo\/image\/","url":"https:\/\/www.microplanet.ma\/wp-content\/uploads\/2023\/05\/logo5.png","contentUrl":"https:\/\/www.microplanet.ma\/wp-content\/uploads\/2023\/05\/logo5.png","width":400,"height":133,"caption":"MicroPlanet"},"image":{"@id":"https:\/\/www.microplanet.ma\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/ArduinoPlanet\/"]}]}},"_links":{"self":[{"href":"https:\/\/www.microplanet.ma\/en\/wp-json\/wp\/v2\/product\/53300","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.microplanet.ma\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.microplanet.ma\/en\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.microplanet.ma\/en\/wp-json\/wp\/v2\/media\/53301"}],"wp:attachment":[{"href":"https:\/\/www.microplanet.ma\/en\/wp-json\/wp\/v2\/media?parent=53300"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.microplanet.ma\/en\/wp-json\/wp\/v2\/product_brand?post=53300"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.microplanet.ma\/en\/wp-json\/wp\/v2\/product_cat?post=53300"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.microplanet.ma\/en\/wp-json\/wp\/v2\/product_tag?post=53300"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}