Description
10,000 mAh 30 W Fast-Charging Power Bank
Portable power bank for charging compatible phones, tablets and other USB devices. The source lists a 10,000 mAh Li-polymer battery and up to 30 W USB Power Delivery (PD) output.
Specifications stated in the source
- Nominal capacity: 10,000 mAh (Li-polymer cells).
- USB-C input: 6 V/3 A, 9 V/2 A or 12 V/1.5 A; stated maximum 20 W.
- Micro-USB input: 6 V/2.4 A.
- Two USB-A outputs and one USB-C output: listed profiles are 6 V/4.5 A, 9 V/2.23 A or 12 V/1.67 A; stated maximum 30 W PD.
- LED percentage display; approximate dimensions 150 × 75 × 24 mm; approximate weight 250 g.
- Protections claimed by the source: overcharge, over-discharge, short circuit and overtemperature.
Profile note: the listed voltage/current combinations do not all correspond to the stated 20 W input and 30 W output maxima, and the stated 6 V USB profiles are unusual. Confirm the actual port labels and supported USB-PD profiles on the product before use; charging speed and compatibility depend on the connected device and cable.
Use
Charge the power bank through its USB-C IN or Micro-USB IN port with a compatible supply. Connect a device to USB-A OUT or USB-C OUT. The source says the bank negotiates the device voltage and current. Disconnect cables after use, keep it away from extreme heat and moisture, and do not open or expose the cells to fire. Do not use damaged or swollen lithium cells.
The source lists use with phones, tablets, compatible lightweight laptops and small USB accessories. Laptop charging requires that the laptop supports power input through USB-C PD and that its required power profile is supported.
