Description
D-P05 20,000mAh Power Bank with 30W Fast Charging
High-capacity portable battery for charging smartphones, tablets, and lightweight laptops. It supports Power Delivery up to 30 W and offers multiple input and output ports.
🔧 Technical specifications
- Model: D-P05
- Capacity: 20,000 mAh (Li-polymer cells)
- USB-C input: 6 V–3 A, 9 V–2 A, or 12 V–1.5 A (PD up to 20 W)
- Micro-USB input: 6 V–2.4 A (14.4 W)
- 2 × USB-A outputs: listed profiles 6 V–4.5 A, 9 V–2.23 A, or 12 V–1.67 A (PD up to 30 W)
- USB-C output: listed profiles 6 V–4.5 A, 9 V–2.23 A, or 12 V–1.67 A (PD up to 30 W)
- Maximum output power: 30 W (as stated in the listing)
- Display: LED indicator for remaining charge percentage
- Dimensions: approximately 150 × 75 × 24 mm
- Weight: approximately 300 g
- Built-in protections: overcharge, over-discharge, short circuit, and over-temperature
💡 Typical applications
- Fast charging USB-C/USB-A smartphones and tablets
- Portable power for small laptops and ultrabooks
- Charging action cameras, drones, GPS devices, and Bluetooth speakers
- Portable power for USB fans, LED lamps, and IoT accessories
- Travel, camping, office, and emergency use
⚙️ Use and care
- Recharge the power bank: Connect a USB-C or micro-USB cable to the corresponding input and a suitable 5–12 V source capable of at least 2 A.
- Follow the LED indicator until it shows 100%.
- Power your devices: Connect a USB-A or USB-C cable to a suitable output.
- The power bank negotiates a supported voltage (6 V, 9 V, or 12 V) and provides up to the listed 30 W maximum.
- The LED display indicates remaining charge in 5% increments; the unit enters standby when no load is detected.
- Keep away from water and extreme temperatures. Do not dismantle the enclosure. Disconnect cables after use to reduce passive discharge.
Tip: Use short, good-quality cables. The source listing recommends recharging with a PD adapter rated 20 W or higher. Confirm the actual output profile on the device label for your connected equipment.
