Description
Gordak 952B Hot-Air SMD Rework Station
Hot-air station for SMD rework, supplied with a soldering iron holder according to the listing.
- Model: Gordak 952B
- Rated supply: 220V AC, 50/60Hz
- Hot-air temperature range: 100–450°C, as listed
- Soldering iron temperature range: 200–480°C, as listed
- Soldering iron power: 60W, as listed
- Pump type: diaphragm
Specification discrepancies in the source: it lists 270W electrical power, a 250W heater, a 45W pump, and a 60W soldering iron. It also lists airflow as “120L/min max” and 0.16–1.2Nm³/h. These figures do not agree with one another; confirm the specifications for the supplied unit with the manufacturer before selecting settings or designing a setup.
Before first use: the source says to remove the screws securing the pump underneath the station. Follow the station’s manual and check that this step applies to your unit.
The hot-air nozzle and soldering tip reach high temperatures, and the station runs from mains voltage. Keep the hot outlets away from people and flammable materials, use a heat-resistant work area, and follow the manufacturer’s operating instructions. See the Gordak 952B product page.
