Description
HX711 Load-Cell Amplifier Module with 5kg Load Cell
Bundle containing an HX711 load-cell interface module and a load cell listed with a 5kg nominal capacity. The HX711 is a 24-bit ADC designed for bridge sensors such as load cells.
HX711 module features listed
- Two selectable differential input channels
- On-chip low-noise PGA gains: 32, 64 and 128
- Selectable output data rates: 10 or 80 samples per second
- Simultaneous 50/60Hz supply rejection (as stated)
- Supply range: 2.6–5.5V
- Current: under 1.5mA normal operation; under 1µA standby (as stated)
Load-cell wire connections shown in the listing
- Red: E+
- Black: E−
- Green: A+
- White: A−
Load-cell specifications stated by the seller
- Nominal load: 5kg
- Output sensitivity: 1.0 ±0.15mV/V
- Repeatability and five-minute creep: 0.03% FS (listed)
- Aluminium alloy; IP65 protection (listed)
- Operating temperature: −20 to +85°C (listed)
- Safe overload: 150% FS; ultimate overload: 200% FS (listed)
These specifications are seller stated. Mount the cell as intended, avoid side loads and shocks, calibrate with known weights, and do not treat overload figures as operating capacity. Confirm the actual wire colors and module pin labels before connection.
